
Tile adhesives
Category:
Paint and Mortar
Product description
Product Description
SETAKY® Tile Adhesive: It is a grey, cementitious powder, fast setting, polymer modified, powdered cement based adhesive, specifically formulated to bond tiles onto a variety of substrates.
Specifications
Appearance |
Grey or white powder |
Pot life |
Approx 3 hours at 20℃ |
Open time |
20 minutes at 20℃ |
Coverage |
5-6m2/25kg bag at 3mm bed |
Tensile Adhesion Strength |
≥1.5MPa under all test conditions |
Early Tensile Adhesion Strength |
≥1.0MPa after 6 hours |
Temperature Resistance |
0°C - 60°C |
Resistance to Damp |
Good |
Tensile adhesion strength(28 days) |
> 1.5MPa |
Application range
- All sizes floor tiles, and wall tiles smaller than 400x400mm;
- All types of ceramic, porcelain, slate, small size natural stone, granite and marble, etc;
- For both interior and exterior application;
Key properties
- Easy to handle, performance is better than general cement mortar;
- High adhesive bond strength;
- Sliding-resistance, thin construction layers, no hollowness, environment friendly, waterproof well.
Surface preparation
- All surface should be strong, dry, clean, no shake, oil stain, wax stain, concrete curing agent and other loose things.
- If the surface is covered with paint, it should be hacked and at least exposed 80%.
- New concrete surface should be cured for 28 days at least, then pave tile.
- New plaster base should be cured for 7 days at least. Then pave tile.
- You can use industrial detergent or degreasing dirt agent to clean the old concrete or plaster surface. Then use high pressure tap to clean up. It can be paved tile after airing 24h.
- Before construction, the surface need to be wetted, if the surface is water absorption strong or in high temperature, dry environment.
Packaging and Storage
A. Standard Packing: In 25kg paper bags inner with PE bags
B. Big Bag or other special packages are possible on request.
Store it in a cool, dry place below 30°C and protected against humidity and pressing, since the goods is thermoplastic, storage time should not exceed six months.
Safety notes
The above data is in accordance with our knowledge, but don’t absolve the clients carefully checking it all immediately on receipt. To avoid the different formulation and different raw materials, please do more testing before using it. We reserve the right to alter our product and without informing in advance.
Other information
Shandong Xindadi Industrial Group Co., Ltd.
Yiyang Industrial Park, Yiyang Township, Feicheng city, Shandong, China
info@setaky.com
www.setaky.com
previous page
next page