
Joint Filler
Category:
Paint and Mortar
Product description
Product Description
SETAKY® Joint Filler is a cementitious grout designed for use with most types of ceramic tiles and natural stone joint filling, for both wall and floor, interior and exterior applications.
Specifications
Form |
Powder |
Colour(S) |
White |
Potlife |
Approx. 40 minutes @ 20°C |
Curing Time |
24 hours @ 20°C |
Open Time |
15 minutes@ 20°C |
Time To Traffic |
Full Traffic after 12 hours (depending on site conditions) |
Compressive Strength |
≥1.5 MPa under all test conditions |
Fold Strength |
≥3.5MPa |
Contract After 28 Days |
≤2mm/m |
Water Absorption Rate 30 Min |
≤2g |
Water Absorption Rate 240 Min |
≤5g |
Abrasion Resistance |
≤1000mm3 |
Where to Use
Can be used for grouting joints that are 1-10mm wide.
For both internal or external, wall and floor grouting applications.
Properties
Non-shrink
Mould and mildew resistant
Never aging and cracking,
Excellent water repellent
Surface Preparation
Before commencing grouting, ensure the tile adhesive has set firmly. This usually requires 24 hours before grouting work.
Remove any spacer lugs, rake-out any excess adhesive and any loose or foreign material from the grout joints.
In general, ensure the grout joints are clean and dry.
Mixing
Add Setaky Joint Filler powder to a bucket of clean water mixing constantly with electric mixer until a thick creamy consistency is achieved.
The mixing ratio is 25kg of Setaky Joint Filler powder to approximately 6.5 liters of water.
Allow the mixture to stand for 10 minutes, remix, and then use the adhesive.
Packaging and Storage
A. Standard Packing: In 25kg paper bags inner with PE bags
B. Big Bag or other special packages are possible on request.
Product can be stored up to 12 months in an elevated, cool dry place in original packaging.
Other information
Shandong Xindadi Industrial Group Co., Ltd.
Yiyang Industrial Park, Yiyang Township, Feicheng city, Shandong, China
info@setaky.com
www.setaky.com
previous page
next page